The Eco-Shop


 M.S. Garbage Bin Capacity – 1100 Liters.

  •  Heavy Caster Wheel – 04 Nos.
  •  Painting of your choice.

Compactor Bin 1100 Litres

  • FRONT / REAR PANEL :  Material 1.60 mm thick IS: 2062.
    WELDING :  All internal joints are fully welded by hand with all internal body seams continuously welded.
    SIDE PANEL :  Material 1.60 mm thick IS: 2062
    BASE :  Material 1.60 mm thick IS: 2062
    TOP FRAME :  The top frame is complete welded square tube Size – With Top Lid 25x25 mm and Without Top Lid 32x32 mm.
    TOP LID :  1.20 mm Thick MS sheet properly strengthened with proper square pipe of 25x25 mm.
    HANDLES :  Danish handle at both ends of the container. Bright bar Ø16 mm BS EN 10305.
    WHEEL BRACKET :  3.00 mm thick pressed steel to a minimum height of 40 mm welded to pressed base.
    EMBOSSING :  5 Nos. embossing by hydraulic press to emboss on front and back panel for more strength of plate. 04 no’s emboss on each side panel.
    DRAIN SYSTEM :  We provided 5 Nos. holes in bottom plate of garbage bin, for rain water not stay in garbage bin.
    LIFTING BAR :  3.00 mm thick Seamless steel tube with diameter 42 mm with step profile to ensure safe and efficient on vehicle lift.
    WHEEL :  All four casters are 200 mm Diameter steel centered Caster wheel. All wheel 360˚ swivel arrangement.
    SAFE WORKING LOAD :  Safe working load of 1100 Ltrs. Garbage Bin is -600 Kgs.






We offer the latest technologies in renewable energy, waste management, and

eco-friendly innovations.


Our services cover the entire life cycle of your investment spanning project design, installation & commissioning, operation, maintenance and repairs

for all the technologies we promote #ForThePlanet.